Player web interface

From SpinetiX Support Wiki

(Redirected from Web interface)
Jump to: navigation, search


The built-in responsive player web interface offers access to the full management of the player from a standard web browser. It comes with the following tools:

Connect to the web interface

See also the "Get started with the player" tutorial for more details about connecting the device on your network.

To access the player web interface, simply enter http(s)://Player_address/ in a browser address bar.

At this point, you get directed to:

Note Notes:
  • It is always possible to return to the home page by clicking on the player name on the left side of the top bar menu.
  • The default user created on the player is "admin" (it cannot be changed, nor removed), with its default password set to "admin" as well - you are prompted to enter a new password at the last step of the Configuration Wizard - it is strongly recommended changing the default password for obvious security reasons. This can also be done later from the User manager tool.
  • If the player is in ARYA and you want to access its Control Center, you need to remove it first from ARYA.

Control Center home page

Control Center home page

The Control Center home page displays general information about the device: player status summary, current settings, the content snapshot, plus some quick links to maintenance tasks. A left side menu provides links to all the other pages in Control Center.

Player status

This section contains the player logo, its date/time information, plus six information boxes (clicking on any of them, brings out more information and / or links to configuration pages), as following:

  • Up time
    Current running time of the player.
  • CPU Load
    Current CPU usage of the player; clicking on the box gives extended info about CPU distribution and frame drops.
  • Storage
    Current use of the player internal storage.
  • Display
    Current display status.
  • Network
    Status of the network connection. An exclamation mark may be shown in case of network issues. Clicking on the box gives extra network information such as IP addresses, hostname address, and MAC address.
  • Firmware
    Current player firmware. An exclamation mark may be shown in case the firmware needs to be updated. Clicking on the box gives extra information about the firmware update.

Current Settings

This section gives a brief summary of the important settings of the player:

Plus two buttons:

  • Enable/Disable ARYA
    Toggles the ARYA mode on the player.
    This button is not present by default on HMP350 and HMP300, but you can apply a special configuration file to enabled it.
  • Configuration Wizard
    Starts the Configuration Wizard, allowing to redo the initial steps of configuring the player.
    The Configuration Wizard is automatically started the first time Control Center is accessed; during the initial setup, an additional step is required to configure the admin password of the device.

Quick Links

This section allows the user to do the following maintenance operations:

  • Restore Config
    Restore a configuration backup. This can be used to copy configuration from another player or to restore a previous configuration is cases where a factory reset was performed on the unit for instance. To generate a configuration backup, go to the System pages.
  • Monitor with Cockpit
    This is displayed if the device is not monitored by Cockpit and provides a quick link to System > Cockpit page that allows adding the device in Cockpit.
  • Open in Cockpit
    This is displayed if the device is monitored by Cockpit and provide a quick link to the player monitoring page of Cockpit for that device.
  • Generate Report
    Generate a report from device. This is required whenever the device is not functioning properly and support is needed.
  • Restart Now
    Restart the device in case of configuration changes, or any other maintenance operation.


This section shows a snapshot image of what is currently displayed by the player. Click the "Refresh" button to reload the snapshot image.

Top bar menu

The top bar menu is present on all the pages of the player web interface and provides the following quick links:

Note Notes:

Custom HTML interface

Added in firmware 4.2.0. Applies to HMP300, HMP350, and HMP400.

You can add a custom HTML interface on the HMP300 and HMP350 players by including a simple index.html page or an "interface" folder (containing an index.html, plus some other files, like CSS, scripts, etc.) within your project and publish it onto the player.

  • The file interface/index.html takes precedence over index.html.
  • The "title" element of this index.html page will be added as an entry onto the top bar menu interface.
  • The interface page should not contain absolute links to other files within the project, only relative links are guaranteed to work reliably.

This custom HTML interface can be used, for instance, to control the content displayed by the player - for that use an "Action to Switch" interactive widget inside the project and update the Shared Variable controlling it through Web Storage REST API calls from the custom HTML interface.


  • In case of using IE browser to access the player web interface, make sure that compatibility mode is disabled.
  • Internal Server Error - The server encountered an internal error or misconfiguration and was unable to complete your request.
    If this error is received when trying to connect to the player web interface, then either the firmware got corrupted or the player is incorrectly configured - the solution is to install the latest firmware package from Recovery mode.
This page was last modified on 19 March 2021, at 15:14.