IBX410W
From SpinetiX Support Wiki
Introduction
The iBX410W is the versatile digital signage player powered by the latest technology that effortlessly meets all your signage needs. With fanless commercial-grade design, cutting-edge Intel® Atom® processor and DSOS™, iBX410W is powerful yet affordable, capable of delivering reliably in any signage scenario.
Key Features
- Latest generation Intel® Atom® processor
- DSOS™ by SpinetiX – signage-dedicated lightweight OS
- Fanless, compact, and flat-form factor design
- 4K | 60 FPS ready
- 128 GB of internal storage
- Designed for 24/7 use
- 3-year warranty included, extendable to 5
- Wi-Fi support
Downloads
Hardware
Main characteristics
Processor | Intel™ Atom x6211E (Elkhart Lake) |
---|---|
Memory | RAM: 2x 4 GB DDR4-3200 |
Storage | Internal: Industrial 128 GB SSD M.2 M-Key (2280) External: Flash drive, hard disk (via USB 3.1) |
Power | 60W power supply adaptor (included), power required: DC +12V 5A, lockable power connector |
Operating environment | Ambient temperature: 32 - 104ºF / 0 - 40ºC Storage temperature: -4 to 122ºF / -20 to 50ºC Relative humidity: 10-90% non-condensing |
Real-time clock (RTC) | Accuracy ±1 min./month, backed by battery (BR2032) |
Dimensions | W x H x D: 181 x 21.5 x 123 mm, respectively 7.13 x 0.85 x 4.84 inches |
Weight | 840g ± 5g, respectively 29.63 oz |
Input & outputs
Video output | 1x HDMI Port 2.0b (type A)
Display power saving: DVI DPMS, serial port |
---|---|
Audio output |
Digital audio (stereo and 5.1/7.1 surround sound) via HDMI, or any of the USB ports (using a DAC device) 1x Analog line-level audio (stereo) via dedicated 3.5 mm jack port |
Network
connectivity |
1x Ethernet 2.5 GbE 8P8C port (a.k.a. RJ45), IEEE 802.3ab/802.3u/802.3az/802.3bz standards
Wi-Fi IEEE 802.11a/b/g/n/ac Wave 2, 2x2 MIMO, operating in the 2.4 GHz and 5 GHz bands |
USB port | 3 x USB 3.1 Type-A |
Serial port | 1 x RJ45 port dedicated for RS232 |
- For digital audio output over any of the USB ports, you'll need to use an adapter/device capable of active digital-to-analog conversion (DAC), compliant with the USB Audio Class (UAC).
- The player does not support 3G/4G USB cellular modems.
Power button
The player's power button is multi-functional - it can be used to restart the player after it has been shut down, but also:
- Briefly press (max 1s) and release it to trigger the On-Screen Display (OSD) showing the player addresses, firmware version, DSOS license type (if any), and other player identification information.
- Double-press it or hold it for 3 seconds to trigger a shutdown of the device.
- You should wait for 10–15 seconds for the player to completely shut down (no video signal is displayed), then you can safely unplug the power supply. To restart the player, briefly press the power button again.
LEDs
The player has the following LEDs on the front side:
- Power LED ⇒ light up solid red when the player is powered and running.
- SSD LED ⇒ blinks green when the internal storage is accessed.
- Two LEDs are integrated within the network connector:
- Left LED shows the network speed by changing its color, as following:
- off ⇒ 10/100 Mbps network
- solid green ⇒ 1000 Mbps (Gigabit) network
- Right LED shows the network activity, as following:
- off ⇒ the link is not present
- solid amber ⇒ the link is present;
- blinks amber ⇒ there is link activity (i.e., network packets);
- Left LED shows the network speed by changing its color, as following:
Enclosure/casing
The enclosure is made of aluminum and SGCC.
Mounting
The player can be mounted using the included standard-system brackets. See the technical drawing above for more details.
- If the mounting surface is itself well ventilated and/or will help with heat dissipation (e.g., a separate bracket of a display mount) then the player can be mounted flush with the surface, but you should monitor the temperature during use.
- If the mounting surface is attached to another heat source (e.g., the back panel of a display) then you should use standoffs to allow air to circulate around the player, and monitor the temperature closely.
- The mounting brackets are attached with four screws, and they can be removed if necessary.
Identification
Each iBX410W player has a unique serial number and a MAC address. Each player has also a device name, set by default to the player serial number, displayed and configurable within the Control Center interface.
A sticker with the serial number, barcode, player model and few other information can be found on the bottom side of each player. This helps to identify the unit and it should not be removed.
Logo and printing
- Situations may arise where labels or transfers may need to be applied to the player. This is generally not recommended by SpinetiX as the heat generation of the device may be affected.
- There is almost no risk of a sticker or label removing the logo printed on the player; the printing process used is a special type which results in ink being protected by the outside layer of aluminum itself.
- Any material affixed to the player must be entirely removable without a trace for the unit to remain within warranty.
Power supply
The external power supply (included) has the following characteristics:
- Model: FSP060-DHAN3
- AC Input: 100-240V~, 1.8A 50-60Hz.
- DC Output: 12V ⎓ 5A 60W
- DC cord: power adapter (w: 11cm) + 120 cm attached cable, lockable power jack
- AC cord: 2x detachable cables of 180 cm for type B and type E/F plugs.
Warranty
SpinetiX offers 3 years of Hardware Limited Warranty for iBX410W products.
- A 5-year warranty extension can be purchased separately.
- The player has a very low probability of failure because its hardware architecture is free of moving parts. There is no official MTFF/MTTF/MTBF calculated; the component with the shortest MTTF is currently the internal storage, however, the high-quality cards used by SpinetiX are certified for at least 5 years of use by the manufacturer.
- The warranty does not apply to the external power supply unit, nor the internal memory medium (storage). See General Terms & Conditions of Sale (Exclusions section) for more details.
Software
Operating System
The embedded DSOS™ is a secured operating system designed for digital signage players, especially for demands of defense, financial, cruise vessel and other high-availability scenarios. It cannot be changed in any way, and no other OS can be installed on the player.
Rendering engine
Layer composition | Multi-layer, multi-video decoding capability |
---|---|
Text | Unicode support (international text); bidirectional (right-to-left, left-to-right) Fonts: TrueType, OpenType user fonts, built-in fonts (Western, Cyrillic, Arabic, Greek, Hebrew, Chinese, Japanese, Korean, Thai, Hindi, etc.) |
Media file formats | Image formats: JPEG, PNG, GIF, SVG, PDF/A Video formats: MPG, MP4, M4V, MOV, MKV, AVI, VOB, TS, WMV Audio formats: MP3, AAC, WAV, WMA, AC3, M4A, MKA |
Video codecs | Multi-video decoding capable, 4K60p 4:4:4 H.264/MPEG-4 AVC: HP@L5.2, H.265/MPEG-H HEVC: L5.1 MPEG-2: MP@HL, MPEG-4: ASP, MJPEG WM9/VC-1: AP@L3 |
Audio codecs | AAC-LC, HE-AAC, AC3, MPEG Layer I, II, III (MP3), WMAv2, AC3 |
Animation | Elementi playlists, transitions, effects |
Content languages | SVG Tiny 1.2+, HTML5, Canvas, SMIL Animations, iCalendar (RFC 5545) |
Scripting language | JavaScript (ECMAScript 5), jSignage™ (jQuery, Layers, Graph, QRCode, etc.), WebStorage, XMLHttpRequest |
External data access | AJAX, REST, HTTP/HTTPS with custom certificates or SRP, raw TCP/UDP |
Interactivity | USB input devices (touch screen, keyboard, mouse, presenter, barcode scanner, etc.), USB HID I/O, network triggers, serial port (JavaScript COM API) |
Video Wall | Accuracy ± 1 frame, unlimited screens |
Streaming | RTSP, RTP, UDP (multicast capable), HTTP |
DSOS activation licenses
Description
The iBX410W players are working out of the box with SpinetiX ARYA™ cloud-based service, without needing a particular DSOS license, however, not all the players' features are available. More features can be unlocked with one of the DSOS licenses detailed below.
This DSOS license activates all APIs for content automation and distribution.
This DSOS license activates native support for HTML5 and physical input/output APIs.
This DSOS license activates all SpinetiX features and APIs for maximum integration options, such as multiscreen synchronization/video wall, custom resolution, streaming, network triggers from external devices or applications, etc.
Managing
- For buying a DSOS activation license (or an extended ARYA Enterprise plan), please refer to our ecosystem of channel partners.
- For activating, modifying, and removing DSOS licenses, please visit our guide on how to activate a Feature Set on your player, which includes all the information you need to manage your licenses effectively.
Content management
The iBX410W players works out-of-the-box with SpinetiX ARYA™ cloud-based service. The player can also display content created with Elementi when a matching DSOS license is activated on it.
SpinetiX ARYA
SpinetiX ARYA is a cloud-based visual communication solution, easy to use and accessible from anywhere from a browser from any device (PC, tablet, smartphone) and at any time. The carefully crafted templates with animations and transitions will show off what’s on sale, opening hours, person showcase, news, menu weather and more.
SpinetiX ARYA evolves with your needs. Its true SaaS (Software as a Service) nature means new exciting features are always added and a suite of advanced capabilities can be unlocked depending on the way your requirements grow. See the Key Features.
All you need to get started is a SpinetiX ARYA cloud account, a compatible digital signage player, and any digital display.
Elementi
Elementi is our simple, yet powerful digital signage software, letting you seamlessly publish and schedule content onto your player. The bond between Elementi and the iBX410W players ensures consistency in delivering a visually rich experience to any combination of screens across your network day after day, year after year - regardless of external factors such as evolving PC standards and hardware.