Use myDrive as content server

From SpinetiX Support Wiki

Jump to: navigation, search

Introduction

The HMP is able to automatically retrieve content from a web server, which is useful for large setups involving a centralized content server or whenever is not possible to push content directly on the player (for instance, due to firewall / NAT usage).

To facilitate the content deployment for such setups, Elementi M and Elementi X offer the possibility to publish the content directly on a server through the Publish Location feature. This feature is not available for Elementi S.

The tutorial below explains how to publish content from Elementi (M or X) on myDrive.ch server (a free swiss online storage service), and then how to configure the HMP devices to retrieve and display that content.

Tutorial

  • Difficulty: Easy.
  • Total duration: 10-15 minutes.
  • Requirements:
    • Elementi M or Elementi X, version 3.0.0 or later. (The latest version is recommended.)
    • One or more HMP devices using firmware 3.0.0 or later. (The latest version is recommended.)
    • A project to be used as content.

Publish content on myDrive server

Publish Location for myDrive.ch
Publish on myDrive location
  1. Create an account on myDrive.ch, if you don't have one already.
  2. Open Elementi and prepare the content to be published on the server.
  3. Open Elementi Devices view and create a new Publish Location with the following details:
    • Protocol: Secure HTTP
    • Hostname: webdav.mydrive.ch
    • Path: /MyProject
    • Security: enter the username and password for your myDrive account
  4. Publish the content onto the newly created Publish Location.

Display the project on HMP350 or HMP300

The HMP can retrieve the content from a web server and display it on the screen, using Scheduled Download.

  • Scheduled Download is strongly recommended because it is resilient to network and bandwidth problems, which are inevitable when using an public server.

First you need to add the credentials for myDrive server on the HMP, otherwise it won't be able to connect to the server.

Adding credentials

Saved Passwords

In order for the HMP to be able to retrieve the content from your password protected web server, you need to add the credentials on the HMP.

For that, follow these steps:

  1. Open HMP Control Center > System > Saved Passwords.
  2. Add https://webdav.mydrive.ch/ as Server URI and the username and password of your mydrive.ch account.

Scheduled Download

Content - Scheduled Download

To add a Scheduled Download to the HMP, follow these steps:

  1. Open HMP Control Center > Content > Scheduled Download.
  2. Under "Server URI", enter https://webdav.mydrive.ch/MyProject/.
  3. Select the type of update to be performed (Manual, Hourly, Daily)
    • In case of Daily update, select the time at which you would like the publish action to take place.
    • In case of Manual update, you need to press the reload icon to trig the update of the content manually.
  4. Click on "Apply" button. Once the download is completed, the HMP will display the content retrieved from your web server.

Display the project on HMP200 or HMP130

The HMP can retrieve the content from a myDrive.ch and display it on the screen, using Pull Mode.

  • Pull Mode is strongly recommended because it is resilient to network and bandwidth problems, which are inevitable when using an public server.

First you need to add the credentials for myDrive server on the HMP, otherwise it won't be able to connect to the server.

Adding credentials

Network Credentials for myDrive

In order for the HMP to be able to retrieve the content from myDrive.ch, you need to add the credentials on the HMP.

For that, follow these steps:

  1. Open HMP Control Center > Network Settings page > Credentials tab.
  2. Add https://webdav.mydrive.ch/ as Server URI and the username and password of your mydrive.ch account.

Pull Mode configuration

Pull Mode configuration

To configure the HMP for Pull Mode, follow these steps:

  1. Open HMP Control Center > Content Settings page > Pull Mode tab.
  2. Select "Manual settings" option and enable "Automatically upload project to the HMP[...]" option.
  3. Under "Project source", enter https://webdav.mydrive.ch/MyProject/ .
  4. Select the time when the HMP should start pulling the content (you check the status within uploader.log).
  5. Click on "Apply" button. Once the pull action is completed, the HMP will display the content retrieved from myDrive.ch.

See also

This page was last modified on 30 January 2017, at 19:57.