Search results

From SpinetiX Support Wiki

Jump to: navigation, search
  • ...[[Wikipedia:Tera_Term|Tera Term]] etc.) to connect to an [[HMP]] over the network and send commands using the [[Shared_Variables_legacy_server#TCP_interface| ...→ [[Advanced_applications_settings#Network_API|Advanced Applications → Network API]] page.
    4 KB (566 words) - 18:16, 1 February 2023
  • [[Category:HMP]][[Category:Peripherals]][[Category: Network]] == Network setup ==
    10 KB (1,545 words) - 15:37, 3 March 2017
  • [[Category:Developer]][[Category:APIs]][[Category:Content]][[Category:Network]] ...ayers are located in private networks protected by firewall/NAT and direct network access is not avaialble to [[content_push|push the content updates]].
    36 KB (5,589 words) - 13:11, 19 April 2024
  • # Connect the network and power supply cables to the Moxa device. # Go to the "Network" tab.
    12 KB (1,844 words) - 12:59, 27 October 2023
  • [[Category:Network]][[Category:Peripherals]][[Category:HMP]][[Category:DiVA]][[Category:iBX]] ...es. To connect to a Wi-Fi LAN, a device has to be equipped with a wireless network interface controller (WNIC), which uses an antenna to communicate via micro
    4 KB (626 words) - 16:15, 25 March 2024
  • Within a digital signage setup featuring SpinetiX devices, the biggest part of the power consumption is ac Within a digital signage setup featuring SpinetiX devices, the biggest part of the power consumption is ac
    4 KB (659 words) - 16:59, 8 April 2024
  • ...ns to their account, providing flexibility to expand their digital signage network as needed. * easy video wall setup with the [[iBX440]] player
    5 KB (771 words) - 20:24, 15 March 2024
  • * Standard 100mbps network switch ...found the first time using the EasyIpSetup from Panasonic, included on the setup CD)
    2 KB (322 words) - 10:54, 6 August 2020
  • ** Standard 100mbps network switch; # Configure an independent network between the [[HMP]] and the Q7401 device.
    2 KB (353 words) - 09:56, 6 August 2020
  • * Standard 100mbps network switch # Click the setup icon in the top right hand corner of the page [[File:Etrovision_setup_icon.
    2 KB (323 words) - 16:28, 31 July 2014
  • ...publish button, and that the target device was no longer available on the network. ...ast groups when the streaming source IP address is known, depending on the network topology this could result in no packets being received from the streaming
    35 KB (5,472 words) - 16:57, 9 June 2017
  • ...use VLC to stream a local video file, with or without transcoding, on the network. The streaming media can then be added inside a [[project]] and played on t ** Standard 100mbps network switch.
    8 KB (1,357 words) - 10:34, 6 May 2021
  • ...g initialized are flushed, but a filter was missing and addresses on other network devices could be flushed as well. * Improved the detection of Network source failure in case they are being used as Primary or Secondary source f
    91 KB (13,792 words) - 15:01, 19 October 2021
  • ...on the network may affect stream performance; always test with an isolated network first.'' == Setup ==
    6 KB (873 words) - 11:59, 2 November 2023
  • * In some particular conditions (unreliable network connections and feeds with large amounts of data) the jSignage feed cache c ...ontent could be dropped if the body of the redirect was over more than one network packet.
    141 KB (21,148 words) - 16:24, 21 February 2024
  • ...sion’s Torpedo allows getting digital broadcast transmission onto the IP network without the need for re-encoding the video. Digital satellite (DVB-S/S2) an ...on the network may affect stream performance; always test with an isolated network first.''
    3 KB (482 words) - 10:45, 6 August 2020
  • ...te set in the RTC) and can reach one of the configured NTP servers via the network. ...watchdog was not capable of recovering from a loss of IP address when the network was configured to use DHCP.
    94 KB (14,988 words) - 12:03, 9 February 2017
  • * Some USB devices, like the U-HID boards, may require one-off setup on a Windows machine first. * [[Interactivity via IP network]]
    10 KB (1,415 words) - 16:31, 12 May 2023
  • ...onfigured, authenticated) of [[802.1X]] on the Ethernet interface in the [[Network settings]] page. ...-Fi setup|Wi-Fi configuration wizard]] would not allow to manually enter a network name (i.e., SSID) if there were no visible networks in range.
    5 KB (767 words) - 10:56, 4 August 2023
  • ...rough the [[Wikipedia:Network_Time_Protocol|Network Time Protocol]] (NTP). Network Time Protocol (NTP), a networking protocol for clock synchronization betwe ...ibrate]] the player's [[internal clock]] before using it in a synchronized setup, because a non-calibrated player may behave very differently comparing to o
    14 KB (2,242 words) - 13:49, 15 March 2024

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)